![]() If the LED lights up after replacing the USB cable or directly plugging the soundbar USB cable into the USB source.Replace the cable with a known good USB cable, or directly insert the soundbar USB cable into the USB power source. If the LED is not lit, check if the USB cable is bad.Once the USB cable is plugged into the USB power source, observe if the white LED light on the right of the soundbar lights up.The following can be used to troubleshoot various issues with the AC511 and AC511M soundbars. Slide the soundbar to the right to secure the soundbar to the bracket ( Figure 9). Align the tabs on the soundbar with the slots on the bracket.Push the bracket down to align it with the stand base.Secure the bracket to the monitor stand ( Figure 8).NOTE: Use the thick rubber cushion between the bracket and the non-swivel base monitor stand. Slide the soundbar to secure it on the monitor ( Figure 5). ![]() Align the hook on the soundbar to the slot at the bottom of the monitor ( Figure 4).Gently peel off the slot covers at the bottom of the monitor ( Figure 3).The following instructions can be used to install the soundbar on a Dell compatible monitor. Note: If you have a monitor not on this list, you can check the monitor's User Guide for compatibility with the soundbar. The AC511 and AC511M soundbars can be installed on the following monitors: SpeakerĮ2414H, P1914S, P2014H, P2214H, P2314H, P2414H The AC511 and AC511M soundbar technical information: FeatureĪC511M: On the monitor stand with a bracket The Dell AC511M soundbar attaches to the stand of certain Dell monitors with an included bracket ( Figure 2). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |